The following describes the preservation of the parts of Cement Pipe Machine:
11选5任中4个多少钱1. Some small parts and electrodes on the cement pipe making machine should be placed in a plastic box or a plastic suction box. They cannot be stacked and directly transported by hand to prevent collisions and corners.
2. Secondly, we also need to pay attention to the fact that the parts on the mold are transferred between the processes of the production process by the cement pipe molder.
3. Make proper identification of the materials and parts during the mold processing to prevent processing errors.
11选5任中4个多少钱4. One more thing that everyone should pay attention to is that the cement pipe mold parts should be placed in the designated position during the processing and transfer process for fixed management.
11选5任中4个多少钱Cement Tube Making Machine
The anticorrosive work of the cement pipe making machine is very important. The following is a detailed introduction by Cement Pipe Machine Manufacturer:
11选5任中4个多少钱(1) Craftsmanship and power tools Rust removal of craftsmanship power tools, such as the appearance pre-treatment of craftsman blades, wire brushes, motorized wire brushes and grinding machines. Prior to finishing of craftsmanship and power, any thick rust layer should be eradicated, and visible grease and dirt should also be eradicated. After finishing by craftsmanship and power, the appearance of dust and debris should be eradicated.
11选5任中4个多少钱(2) Eruption finishing Appearance pretreatment by eruption finishing.
Before eruption finishing, any thick rust layer should be eradicated, and visible grease and dirt should also be eradicated. After finishing the eruption, the appearance of ash and debris should be eradicated. Treatment of mild eruption: When investigating without expansion, the appearance should be free of visible grease and dirt, and free of loose scale, rust, paint coating and foreign matter. When investigating in large cases, the appearance should be free of visible grease and dirt, and almost free of scale, rust, paint coating and foreign matter. Any residue should be sturdy. Thorough eruption disposal: When investigating without expansion, the appearance should be free of visible grease and dirt, and free of scale, rust, paint coatings and foreign matter.
Cement Tube Making Machine11选5任中4个多少钱 has good integrity, independence and mobility. The faster the operation speed, the more finished products, and the higher the work efficiency. Cement pipe making machines usually use pallets to run brick making equipment. Its operation and the power of the working device are independent of each other for easy control and adjustment. During operation, the cement pipe making system should be in an optimal state to achieve the best production results. Before operating the cement pipe-making machine, check the operation process and preparation of the pipe-making machine. Check whether the various systems of the pipe-making machine are operating normally, whether there is any leakage of hydraulic Ningguo hydraulic fluid, and whether the hydraulic oil is sufficient, and replenish it in time if necessary, and check whether the storage box, seals and other components are intact and complete.